Industries Served

Flame Spray Inc. offers a full range of thermal spray coatings used for the protection of aerospace & defense parts and the repair of existing components for the aerospace and defense industries. Repair of components to restore surfaces to their original tolerance. New OEM engine & air frame components with wear resistance & thermal barrier coating.

Flame Spray Inc. offers a full range of thermal spray coatings used for the protection of parts and the repair of existing components for the agricultural industry. Repair of components to restore surfaces to their original tolerance

Hardfacing of components experiencing premature wear to extend the serviceable life.

Salt water corrosion resistant coatings non slip or non-skid coatings restoration of dimension & anti fouling coatings.

Thermal Spray coatings provide a solution to prevent corrosion, increase part lifecycle, and ultimately reduce part replacements over time.

Restoration of surfaces to original condition

Flame Spray Inc. offers a full range of thermal spray coatings used for the protection of parts and the repair of existing components. Repair of components to restore surfaces to their original tolerance

Restore bearing areas on rolls.  Reface roller surface with hard facing materials, corrosion resistance coatings.

Our metal coatings can be applied to all manner of equipment, machinery, parts, and components used in pulp and paper manufacturing

Flame Spray Inc. provides a range of coating solutions for a variety of electronics applications including conductivity, resistivity, non-conductivity, and EMI/RFI shielding

EMI/RFI Shielding – Uniform EMI and RFI shielding can be achieved on electronic equipment enclosures by using thermal sprayed copper, aluminum, and zinc. These coatings provide protection to electronic components from electric “noise” produced by electric motors, controls, switches, transformers, etc.

Wear & corrosion resistant coatings.

Surfacing technologies provide proven possibilities to extend equipment performance during high volume production by reducing part wear for a wide variety of applications within the petrochemical industry

Wear & corrosion resistant coatings.

Flame Spray Inc. coatings are used to restore the dimensions of components that have been worn or corroded.

Thermal spray coatings are used to improve friction and wear and, as a result, the life span of machine parts is enhanced. It is a versatile process that can use a large range of materials starting from pure metals to alloys, carbides, ceramics and even composites. It is economically viable and has wide scope of applications.

Flame Spray Inc. offers a full range of thermal spray coatings used for the protection of parts and the repair of existing components for construction industries. Repair of components to restore surfaces to their original tolerance

Rocket thermal barrier coatings.  Wear resistant & anti friction coatings.

Thermal barrier coatings are state of the art and this concept should be transferred to copper substrates in rocket engine applications. For optimization of a suitable coating, a material system known for gas turbines is employed. In this work a thermal barrier coating system is applied by atmospheric plasma spraying to the copper-based high strength. The coating system is tested in thermal cycling experiments, where no failure of the coating could be detected

Application of pure metals such as silver, gold, aluminum, copper and others for a vacuum vapor deposition application.

Flame Spray Inc. provides sputtering target bonding services for a variety materials that deliver a bond with high thermal and mechanical integrity to ensure optimum sputtering performance.

Corrosion & wear resistant coatings. Nuclear absorption & dielectrics coatings.

New opportunities are now emerging in advanced functional surfaces, including dielectrics, electrical conductors, bioactive materials, and solid oxide fuel cells. In these new applications, thermal spray offers advantages for manufacture of deposits over large area substrates and for the creation of complex conformal functional devices and systems

Coatings to prevent corrosion pump & motor component repair. Gas & Steam Turbine erosion & heat resistant coatings.

Flame Spray Inc. coatings are used to improve friction and wear and, as a result, the life span of machine parts is enhanced. It is a versatile process that can use a large range of materials starting from pure metals to alloys, carbides, ceramics and even composites. It is economically viable and has wide scope of applications.

Hardface grip coatings. The golf club has a coating applied by a thermal spray method at least in the area of the striking surface. The club coatings are preferably applied by a high-speed flame spray method or by a cold gas spray method.

Using thermal spray for improving the aesthetics of fresh, new designs, and additionally extending the life of them, is possibly one of the best tips that can be given to any industry. Today’s methods of advanced processing and engineered coatings are pushing the limits of plastic and metal components beyond anything ever imagined in decades past

Corrosion resistant & anti fouling coatings. The aluminum-zinc coating with high zinc content and the zinc coating possess the anti-corrosion and anti-fouling properties.

Corrosion & wear resistant coatings.

Flame Spray Inc. offers a full range of range of thermal spray coatings used for the protection of newly manufactured parts and the repair of used parts for the refinery industry. Our thermal spray coatings protect and prolong the lifespan of products subjected to wear, erosion, corrosion and fretting.

Wear resistant coating.

Flame Spray Inc. offers a full range of range of thermal spray coatings used for the protection of newly manufactured parts and the repair of used parts for the railroad industries. Our thermal spray coatings protect and prolong the lifespan of products subjected to wear, erosion, corrosion and fretting

Sprayed coatings have become very popular in the art and architectural world. Metals such as Nickel, Aluminum Bronze and Copper are used to coat various parts from stairways, tables, fixtures to gates and fences.

Sprayed coatings have become very popular in the art and architectural world. Metals such as Nickel, Aluminum Bronze and Copper are used to coat various parts from stairways, tables, fixtures to gates and fences.